FR-860
FR860 is a water based acrylic copolymer emulsion with very fine particle size, excellent binding and good wet scrub.it is used in high gloss premium quality emulsion for both interiors and exterior wall coatings.
KEY FEATURES
- Gives clear, hard, tough, non-tacky, flexible and glossy film.
- Very high UV resistance
- Excellent water resistance
- Color retention and high sheen
- Stain resistance properties
TYPICAL APPLICATION
FR860 is used for producing flat coating applications on plasters, masonry, fibrous cement concrete etc. FR860 has good Pigmentability due to which it is ideally suited for Masonry Paints & Texture coating with high performance and least formulation cost.
TYPICAL PHYSICAL PROPERTIES
| Property | Value |
|---|---|
| Appearance | Clear White |
| Solid (% NVC, at 105°C/3 hrs) | 50±1 |
| Viscosity (by B4 cup) | 5-8 poise |
| pH | 8.0-10.0 |
| Specific gravity | 1.04 – 1.08 |
| MFFT (degree Celsius) | 16 |
RECOMMENDED APPLICATION GUIDLINES
Coatings are generally made with high speed mixers by dispersing first fillers, pigments, wetting agents and auxiliaries. FR860 is added at the last let down stage.
- To achieve film formation at lower temperature adequate quantity of coalescing solvents are to be incorporated.
- For higher viscosity, thickeners are recommended to be added
- Suitable defoamer in required quantity is to be added to take care of foam during processing.
- Biocides need to be included in the formulation to guard against micro-organism growth.
COMPATIBILITY WITH (POLYMER EMULSION)
FR860 is miscible with non-ionic & anionic emulsions However, there is a chance that such mixing may affect the property of FR860.
FILLERS
FR860 has good compatibility with calcium carbonate, Dolomite, silica flour, fine sand etc. Also the pigment compatibility is good and can be further increased by incorporating suitable dispersing agent.
SAFETY, HANDLING AND STORAGE
- Store in cool, dry, well ventilated area.
- Protect from freezing
- Container once opened must be closed tightly to prevent contamination
- Do not mix other products without consulting technical team
- Stocks should be used on a first in first out basis
- Wash thoroughly after handling
- Wash contaminated goggles, face shield and gloves
- Do not reuse empty container without professional cleaning
DISCLAIMER
The data, information and suggestion contained in this literature are given purely as a recommended guide, based on our study and experience. It is recommended that prospective users verify the sustainability of the product for their intended application to their satisfaction
